Why DC Is Coming to the Factory
How DC microgrids can make industrial sites more efficient, flexible and ready for renewable energy
Electricity in industry has traditionally been supplied through alternating current (AC) networks. But the way factories produce, store and use electricity is changing. Solar PV systems generate direct current (DC). Batteries store DC. Electric vehicles use DC for charging. And many modern machines and drives already convert AC to DC internally. This raises a practical question for industry: if so many technologies already generate, store or use electricity as DC, why convert it back and forth through an AC system at every step?
Solar panels generate DC. Batteries store DC. Electric vehicles use DC. Many electronic components and electric drives also operate internally on DC. In a conventional AC system, this often means that electricity has to be converted several times: from DC to AC and, later, back to DC. Each conversion causes losses and requires additional power electronics. A DC microgrid can reduce some of these conversion steps. Electricity from a PV system, for example, can be fed directly into a battery or supplied to suitable DC consumers. The ADC Pilot Factory is also investigating how DC networks can enable the direct recovery of energy from variable-speed drives and avoid certain conversion stages.
A DC microgrid connects generation, storage and industrial equipment within one integrated energy system. Instead of treating each component separately, electricity can flow directly between the different parts of the site.
Solar PV can supply suitable DC loads and batteries directly, reducing unnecessary AC/DC and DC/AC conversion steps and the associated energy losses. The same applies to regenerative braking: drives in automated warehouses, lifts, conveyors, robots and other machinery can feed energy back into the DC network when they brake. That energy can be used by another machine operating at the same time or stored in a battery.
Storage also helps to reduce peak demand from the public grid by providing additional power when electricity demand is high. Electric vehicles can be integrated into the same system, charging from locally generated electricity and, with bidirectional charging, potentially feeding energy back into the network as additional storage.
There are also infrastructure benefits. Because DC systems can reduce the number of conversion components and, in suitable applications, require up to one third less cabling, they can reduce material, installation and infrastructure costs.
An energy management system brings these elements together, coordinating generation, storage and consumption according to the site's needs. The result is a more efficient and flexible energy system that can make better use of renewable electricity while reducing losses, peak loads and infrastructure requirements.
The aim is not to replace the AC grid with DC. An industrial site will continue to need its connection to the public electricity grid to supply equipment that is designed to operate directly on alternating current. The ADC Pilot Factory demonstration at Fill in Gurten shows how the two systems can work together. (Picture) The existing grid connection remains in place, while the DC microgrid adds another layer of infrastructure for applications where DC offers advantages.
In simple terms, the public grid supplies AC. Power electronics convert it into DC for the DC microgrid. PV generation, batteries, electric vehicles and suitable industrial consumers can then be connected within this DC network. Where an AC supply is required, electricity can be converted back at the relevant point. This hybrid approach is particularly interesting for existing factories. Instead of replacing the entire electrical infrastructure, DC sections can be introduced step by step wherever they offer a technical or economic advantage.
Electric vehicles make the concept particularly interesting and easy to understand. At the Fill site, a PV system with a current capacity of 1.9 MWp is combined with an increasing number of electric vehicles. With bidirectional charging, these vehicles can not only consume electricity but also feed it back into the site's energy system.
For example, vehicles can provide stored electricity when solar generation is low and recharge when solar production increases. The conventional grid connection remains available to ensure a reliable supply and balance any remaining differences. The electric vehicle therefore becomes more than a consumer. It becomes a flexible energy resource. This is an important shift. As industrial sites electrify their vehicle fleets, the vehicles themselves can become part of the site's energy management system, helping to increase the use of locally generated renewable electricity and reduce power peaks.
In a conventional AC system, electricity is distributed at 50 Hz. Many modern industrial consumers, however, already operate with DC intermediate circuits. A frequency converter, for example, first converts AC into DC and then generates the required AC voltage for the motor. A DC microgrid can connect such intermediate circuits within a common DC network. PV systems, batteries and bidirectional charging infrastructure can also be connected to the DC bus through power electronics.
This can reduce the number of conversion stages and therefore conversion losses. At the same time, DC systems require specific protection concepts. Unlike AC, DC current has no natural zero crossing, making fault interruption more challenging. The ADC Pilot Factory therefore also investigates protection, safety and reliability alongside energy efficiency and control.
The ADC Pilot Factory is testing DC technology under real industrial conditions at two demonstration sites: at Fill in Gurten and at the TU Wien Pilot Factory Industry 4.0 in Vienna. The project brings together DC distribution, PV generation, batteries, electric vehicle charging and industrial drives, and investigates how these components can operate as part of an integrated energy system.
At Fill, the focus is on a large-scale industrial application combining renewable generation, energy storage, electric mobility and production. At TU Wien, the project investigates DC integration in an industrial production process, including robotic and automated handling systems with regenerative drives. In both cases, the partners are testing not only energy efficiency, but also the control and management of energy flows, system reliability, protection and safety.
A central element is the energy management system, which coordinates generation, storage and consumption and determines how energy should flow through the system. The project is therefore testing the complete chain from individual DC components and power electronics to the network architecture and its control to identify which DC solutions can be transferred to other industrial sites.
Further information
For more information about the Austrian DC Pilot Factory and the project results, contact Gerhard Jambrich, AIT Austrian Institute of Technology, Project Coordinator, at gerhard.jambrich@ait.ac.at. Project website: Austrian DC Pilot Factory