DC bidirectional loading

Why loading is not a oneway street

Bidirectional charging for electric vehicles is more than just a gimmick devised by a few engineers. On paper, it might even seem like a disadvantage to some if their own vehicle can also discharge power back to its charging station. However, this technology forms an important part of the drive to bring about a technological transformation in our society, and thus to create a more climate-neutral Europe. The technology of bidirectional charging must therefore be considered on a scale beyond private use.

What is bidirectional charging?

Bidirectional charging occurs when devices – in this context, EVs – not only have a battery that is charged to ensure the device functions, but can also release its energy in its pure form, i.e. not tied to any specific function. A simple example of this would be a torch that also functions as a power bank. On the one hand, the battery powers the torch’s function, but the energy can also be released for other uses. Electric vehicles can be thought of in exactly the same way, with bidirectional functionality – except that they are, of course, much more complex and offer more functions than simply providing light. Essentially, these are batteries that not only perform their core functions but can also meet any of the user’s needs that can be satisfied by electricity. This versatility now comes in several forms. The simplest of these is V2L, or Vehicle to Load. Here, the vehicle’s energy is used to power another device externally via a cable – such as a camping stove, a construction spotlight at work, or a pump to inflate an air mattress. The whole process is similar to the way in which vehicles with internal combustion engines power other devices via interfaces such as the cigarette lighter socket. The fundamental difference here is that, in the case of a combustion engine vehicle, the vehicle generates and supplies the energy ad hoc as a generator, whereas in the case of an EV, stored energy is released. In this context, the vehicle would be little more than an over-glorified power bank, and that is not, strictly speaking, a ‘new innovation’.

V2H

A new development in bidirectional charging is the V2H (Vehicle to Home) and V2G (Vehicle to Grid) functions. V2H refers to the possibility not only of charging one’s own EV via the home’s energy system, but also of using energy from the vehicle to power appliances in the home. The vehicle thus acts as a source of energy storage. This is particularly relevant when buildings partially replace their electricity supply with PV systems, which produce varying levels of power depending on the time of day. EVs then act as a store of comparatively cheap electricity, which is fed back into the building at other times of the day when a PV system is supplying little or no electricity. This avoids the need to purchase expensive electricity from the grid during peak times, representing a potential saving for end users.

V2G

V2G takes this concept a step further at an economic level. However, ‘Vehicle to Grid’ no longer refers to the use of a single EV as a load storage device and a means of absorbing peak demand, but rather to a collective, interconnected network comprising an entire fleet of EVs. It is no longer simply a matter of enabling individual households to reduce their electricity costs. The primary focus is on making the electricity grid more resilient and moving away from the need for fossil fuel sources, even if these exist only as a fallback solution. Resilience is achieved because blackouts in the central energy infrastructure – whatever the cause – no longer plunge entire regions into darkness across the board; instead, decentralised and interconnected EV networks can at least mitigate such power cuts in the short term. This also opens up a further application that is of interest in terms of a region’s climate targets: as described above, it can help counteract a certain dependence on fossil fuel sources for rapid energy generation. To understand this, here is a brief digression on how peak loads are managed. When energy demand can no longer be met by renewable sources – as is the case during so-called ‘peak load periods’ – either energy must be purchased from external sources, or rapidly deployable power stations, such as coal or gas-fired plants, must be brought online. These power stations have a negative impact on a region’s or state’s climate targets and should therefore be used as infrequently as possible. Peak loads are therefore a problem of supplying the necessary amount of energy when it is needed. Either there would need to be a system capable of generating renewable energy on an ad hoc basis, or energy would need to be stored so that it can be released later when required. A network of EVs can help with the latter approach. Just as a single EV provides cheap electricity in a V2H scenario, an EV network enables the peak load of an entire region to be absorbed, thereby avoiding the need to bring an additional coal-fired power station online. Whilst V2H is primarily intended to offer savings opportunities to individuals, the V2G system serves to fulfil the overarching climate targets of a region or the state. The right infrastructure is crucial here. Microgrids can not only support such networks; indeed, they are what make them possible in the first place. To operate in a decentralised manner, there must be a decentralised infrastructure tailored to the region’s needs. Read more about this in the article “Designing a DC Microgrid: What Needs to Be Considered?”